The NEC offers general guidelines for safe wiring in a bathroom, but remember that local codes always supersede the national code. While many communities base their local codes precisely on the NEC, it is also possible for local requirements to be either more lenient or more stringent, depending on the community. article 210.70 states that all habitable rooms must have a light controlled by a switch in bathrooms.
does it have to be next to the door, or can i put it next to my gfci outlet above the sink. originally the customer wanted a light that had a turn nob built in, would that count as a switch., it is a small bathroom the light is three feet in across from the door. personally i would put it next.
Light Switch Near Shower - Page 2 - Electrical Inspections - InterNACHI ...
Install the light switch in the right location: The National Electrical Code (NEC) specifies the safe location for light switches in bathrooms. According to NEC regulations, light switches should be installed a minimum of 60 inches away from the edge of the bathtub or shower stall. It does not give us a required location for the switch.
I can meet the letter of the law by putting all light switches in the basement, so that the owner would have to go downstairs to turn on the light in the upstairs bathroom. 2017 Code Language: 210.70 (A) (1) Habitable Rooms. At least one wall switch-controlled lighting outlet shall be installed in every habitable room, kitchen, and bathroom.
Bathroom Light Switch Location Code – Rispa
Exception No. 1: In other than kitchens and bathrooms, one or more receptacles controlled by a wall switch shall be permitted in lieu of lighting outlets. Are 230 V lighting switches (plate switches) permitted in a room containing a bath or shower? Yes, a plate switch is allowed outside the zones of a bathroom.
A switch should be at least 0.6 m from the edge of the bath or shower (outside the zones) and must be suitable for the location. Where to Locate Bathroom Light Switches: Planning the layout and design for the bathroom, the location of light fixtures and switches. National Electrical Code 210.70 says where lighting outlets (or switched receptacles) are required, and that control devices (switches) shall be located on the wall near an entrance to the room.
Bathroom Light Switch Location – Semis Online
I'm surprised, but that's all I've found either. Bathroom light switch regulations encompass a wide range of safety, accessibility, energy efficiency, and design considerations aimed at ensuring compliance with building codes and standards. Overall, there is no unique approach to choosing a bathroom light switch location.
The best way is to strike a balance between electrical codes and common sense.
